The Proton 4 is an easy-to-use Lipo and A123 balancing charger that provides a wealth of information about your battery packs. Charges packs with up to four cells wired in series, and at up to a 4 amp rate. The...More info
The ACDC-6 charger is AC and DC compatible right out of the box--no external power adapter needed! Charge up to 15 cells of NiCd/NiMH and 6S of Lithium batteries with a maximum charge rate of 5.0A. The ACDC-6 has an...More info
Tired of charging one battery at a time? How about having to wait until you're done charging your lipos before you can charge your NiXX batteries? Try the Quattro B6! Charge and balance up to four...More info
This B6 Duo has all the power you need to get your batteries charged in no time! With two channels capable of 200W each, this charger packs quite a punch, especially with many new lipos capable...More info
Powerful microprocessor controlled rapid charger for NiCd/NiMH/LiPo/LiIon/LiFe/Pb batteries. The maximum charge power is 200W and maximum charge current is 10A. Comes complete with temperature probe to safely monitor charge temps and terminate charging if temperature exceeds...More info
Don’t go to the flying field without one. Check the charge on a pack before or after a flight, balance an out of balance pack and check the Amps, Volts and Watts of your power system...More info
This is a great little 2-3 cell lipo balance A/C charger to use in your shop, 110 A/C plug is included with the unit. Charge output is .65A per cell, suitable for batteries from 600-1000mAh with...More info
The Balance Pro takes our popular Ultra Balancer to a whole new level. It not only balances lipo packs up 22.2V (6S), it also features a digital readout of the your pack's...More info
Our Ultra-Balancer is the simplest method of keeping your Lipo packs balanced. It can be used for packs up to 22.2 volts (6S). Works as a stand-alone balancer before charging or simultaneously...More info
Combined with the 2-cell Lipo balance charger (part #810-2-019), this power supply provides a convenient way to charge and balance your lipo batteries for the Shark and the Apache. Does not work with NiMH...More info
This adapter board will work with the ACDC-6 and Quattro B6 chargers for balancing batteries Thunder Power/Flite Power-style balance plugs. This board will not work with Bantam E-Station...More info
This adapter board will work with the ACDC-6 and Quattro B6 chargers for balancing batteries Thunder Power/Flite Power-style balance plugs. This board will not work with Bantam E-Station...More info
.jpg&w=120&h=88 "2-Cell Lipo Balancing Charger")
.jpg&w=120&h=88 "Power supply for 2-cell Lipo balance charger")
